HARRIER SERVICE MANUAL PART -1

C635 TRANSAXLE 34 Apply the locking patch using Mopar thread locker. 26.Apply a uniform bead of LOCTITE®509™ Sealer or equivalent to the sealing surface of the case. 27.Install the gear selector assembly; tighten the bolts to 20 Nm (15 ft. lbs.). 28.Apply a uniform bead of Mopar® Threebond RTV Sealer or equivalent to the sealing surface of the NEW input shaft sealing ring. 29.Install the sealing ring to the transmission. 30.Install the Concentric Slave Cylinder (CSC) and bolt to the transmission. Tighten the bolts to 10 Nm (89 in. lbs.) and engage the retention tabs. 31.Connect the hydraulic fitting (2) to the plastic retainer (1). 32.Connect the hydraulic connection at the case.