HARRIER SERVICE MANUAL PART -1

KRYOTEC ENGINE 98 7. Remove both camshaft locking pin. 8. Remove both camshaft from head cover. 9. Remove cylinder head cover gasket. NOTE Gasket not to be reused. 10. Remove cylinder head bolts in shown sequence. NOTE Bolts not to be reused. NOTE Cylinder head bolts will bend when removed. Do not reuse. Gently place the cylinder head on a table with clean surface, and take care to avoid damage to the head surface, valves and glow plug projections . 11. Remove cylinder head gasket. NOTE Gasket not to be reused. Refer “Repair and Inspection Details” section for Inspection details.