SAFARI

49 BODY 29. PROCEDURE FOR REFITMENT/ REPLACEMENT OF SIDE PLASTIC MOULD (Modified) TRIMS Remove the side plastic mould trims in the following order : 1) Bottom panel (no.6) 2) Rear wheel arc (no.5) 3) Rear wall moulding (no. 4) 4) Rear door (no. 3) 5) Front door (no.2) 6) Front Fender (no. 1) 1) Fit front fender, locating the snaps properly and tighten fixing screws (Two Nos) 2) Fit front and rear door trims by locating the snaps properly and tighten fixing screws. (Two screws and a nut for front and four screws and a nut for rear) 3) Fit rear wall by locating the snaps properly and tighten the screws. 4) Fit rear wheel arch. by locating the snaps and tighten the screw. 5) Fit the bottom panel by tightening 5 screws in the bottom, 4 screws in the front door and 3 in the rear door. Fig. 31 1 2 3 4 5 6