SAFARI

21 ELECTRICALS 10. HEAD LAMP / TAIL LAMP ASSY. : Fitment (Head Lamp & Blinker) Fig. 14, 15 & 16 l Locate the spring mounting bracket on the holes in the panel and tighten the bracket with the fasteners. l Insert the Head Lamp into the cutout for the Head Lamp and align the four mounting locations. l Tighten the lamp with the fasteners. l Locate the Blinker in the locating panel. l Insert the Blinker into the slots in the Head Lamp. l Clamp the Blinker spring into the spring locating bracket. l Connect the respective connectors for the Head Lamp and Blinker l Check for the proper fitment of the Blinker by ensuring proper engagement of the spring and the Blinker locating lug. Remove (Head Lamp & Blinker) Please follow reverse procedure for fitment. Fig. 15 Fig. 16 Fig. 14 Head Lamp Assy. Head Lamp Mounting Screws Blinker Spring Side Repeater Lamps : Removal : Use a small screw driver to push in and release the catch and take out the lamp. Fig. 16 Pull out the 2 pole connector and take out the lamp Fitment : Connect the two pole connector and insert the lamp into the cutout and press till the catches hold.