SAFARI

33 4 DLT ENGINE Description Torque kgfm. M12 Screw/bolts used on fuel filter mounting bracket 8 Exhaust manifold on cylinder head nut M8 2 +0.3 Inlet manifold on cylinder head cap screw M8 2 Air inlet elbow to inlet manifold screw M8 2 Starter motor on flywheel housing M10 3 Alternator bracket to cylinder crankcase bolt M8 2.3 Alternator to bracket bolt M10 2 Clamp to support fip screw M8 2.5 Clamp to alternator screw M10 3 Glow plug to cylinder head 2.2 Glow plug connections 0.4 Oil pump on cylinder crankcase 1.5 Assy. strainer to assy. housing screw M6 1 Oil pressure switch on cylinder crankcase 3 Oil cooler bolt M8 3.2 Assy. heat exchanger to oil cooler cover M8 2 -0.5 Sealing plug for water drain hole AM14x1.5 4 Piston cooling nozzle mounting screw 1 Fan mounting bolts M8 3.5 Water pump to cylinder crankcase screw M6 1 Thermostat housing to cylinder head nut M8 0.8 Thermostat cover to thermostat housing nut M6 0.8 Water inlet elbow to cylinder crankcase screw M8 1.5 For clamping assy. pipe line screw M8 2 Temperature transducer on thermostat housing 1.5 Engine support arms on cylinder crankcase M10 4 Lifting hook to cylinder head screw M8 2.5 A.C. compressor (SVL) to a/c compressor bracket (M8, 4 nos.) 2.4 to 3.6 A.C. compressor bracket to crankcase (M10, 4 nos.) 6 +0.5 A.C. compressor (subros) to A.C. compressor bracket. (M8, 4 nos.) 3.2 +0.3 Engine support front to front mounting pad bolt M12x1.5 7 Gear case cover to rear mounting pad nut M10 4 Clutch housing to cyl. block M10 4.6 Fan shroud to radiator screw M6 1 Radiator mounting screw M8 2