SAFARI

Fault- code Fault path Repair- Guideline No. Fault detection by Remarks Faultcode List 10 ABS FAULTCODE LIST C1101 Battery vltg. 1 • Monitoring is activated after running of cut-in Over volt test and when the vehicle has exceeded 6km/h. (>16V) The battery voltage is measured continuously and cyclically assessed. C1102 Low volt • If battery voltage is below 8.2V when ABS (<8V) regulation is active (brake operation and ABS control as well as pressure increase with a vehicle dynamic regulation occur.) • If battery voltage is not in range of minimum 9.4V and maximum 17.4V when ABS regulation is inactive (brake, operation and ABS control as well as pressure increase with vehicle dynamic regulation does not occur). Effects: • Correct function of ABS solenoid valves & of return pump motor is no longer guaranteed. • ABS is passive during the time span but not switched off. • ABS warning lamps are switched on. • EBD is switched off at below 6.9V. Note: The solenoid valves are switched to passive during under or over voltage, a possible return flow of the return pump is suppressed during the time span.