SAFARI

7 DIAGNOSTICS ABS 2. Actuate the components : After clicking ‘ ACTUATE COMPONENTS’ following frame will appear . User can actuate Pump Motor , All Inlet & Outlet valves by using this . e.g . Click on the ‘MOTOR’ to actuate the motor. After clicking the status bar will display “ Actuation in process , please wait….. . ” After actuation it displays the motor actuation status. If it was actuated it gives ‘ MOTOR ACTUATED ’ If the motor is not actuated it displays ‘MOTOR NOT ACTUATED ’ 3. Read DTCs : Click this to read Errors in the ABS system. If Errors are stored in the ECU memory they are displayed in the frame shown in Fig.10 Status bar displays “ ERRORS ARE DISPLAYED IN THE LIST ” 4. Clear DTCs : This function clears the errors from the ECU memory . After clearing the errors tester reads the errors again & then displays the error status. If there are errors in the system then Status bar displays “ THERE ARE ERRORS IN THE SYSTEM PLEASE CLEAR THEM PHYSICALLY “ If there are no errors in the system then Status bar displays “ THERE ARE NO FAULTS IN THE SYSTEM “ Fig. 9 Fig. 10