SAFARI

25 ANTI-LOCK BRAKES ABS Fig. 18 Installation of Electronic Control Unit (ECU) 1. Put the grommets and the mounting studs at appropriate places as shown in Fig. 16 2. Align the bottom ECU grommet to the dowel in mounting bracket and insert ECU so that both the mounting studs get aligned onto the bracket slot. 3. Tighten the nut to the ECU / HU stud with mounting bracket to specified Torque 9-12 Nm. 4. Reconnect five brake lines. Be certain that the three outlet and two inlet lines have been connected to the correct ports. Tighten the coupling nut to specified torque. 5. When installing the brake pipelines on the HUvalve block, theymust be located correctly in the valve block to ensure proper ABS operation. Refer Fig. 1 6. Connect the ECU harness connector. 7. Bleed the brake system. 8. Road test vehicle to ensure proper operation of the base and ABS systems.