SAFARI

56 BRAKES Sr. Trouble Cause Remedy No. 14.ABS warning lamp stays ‘ON’ ABS unit faulty No supply to ABS unit • Check wiring connections & battery condition. Electrical circuit problem : • Check wiring harness Intermittent contact, Wiring connections connections / connections loose/ faulty Component and sensor failure : • Check gap between sensor & RPM sensors/toner rings fitting toner ring loose, gap disturbances, Sensor signal that deviates from the specified levels Circuit / bulb failure • Replace bulb Leakage from hydraulic unit ports • Eliminate leakage by tightening Hydraulic unit fluid level low • Check reservoir fluid level and bleed properly. Unusual response and malfunction • Check sensor condition & in the actuators replace if necessary.