SAFARI

23 BRAKES 4. After removing the drum & servicing the brake, the hand brake lever stopper to be reset on the trailing shoe web and the hand brake cable to be adjusted. DRUM INSPECTION Inspect the drum for cleanliness. Check for crack, scores etc. Check braking surface for wear by measuring the inside dia. Fig. 19. Brake Drum Standard Service limit inside diameter "A" 282 mm 283.5 mm Drum to be discarded if found cracked scored excessively or grooved. Do not weld a cracked drum. It is unsafe and must be replaced. Smoothen up any slight scores Heavy or extensive scoring will cause excessive brake lining wear and it will be necessary to resurface drum braking surface. REMOVAL OF SHOES Jack up the vehicle. Remove the wheels. Remove the brake drum as per the above procedure. Detach the hand brake cable from the lever on the trailing shoe bymoving the lever (13) towards the centre of the brake and removing the cable end from its location in the end of the lever (13). Fig. 20 Using a suitable drift, take out the end of the shoe return spring (7) Fig. 21, from the hole in the w/cyl end of the trailing shoe (3). Reduce the adjuster assembly to its minimum length by lifting the end of the pawl Fig.19 Fig.21 Fig.22 Fig.20 A