SAFARI

16 PROPELLER SHAFT ASSEMBLY FOR 4X2 ASSEMBLY OF CENTRE BEARING ON FRONT PROPELLER SHAFT Pack cavities between dust seals and centre bearing with lithium base grease (bearing grease) Smear grease on the seating surface of centre bearing on front propeller shaft. Install centre bearing assembly on front propeller shaft rear end. Fig.21 Install other spacer ring of centre bearing on propeller shaft bearing, using a suitable drift. Apply glycerin on inner periphery of rubber housing and slide it on to the centre bearing assembly. Apply grease on the splines of front propeller shaft and coupling flange. Insert end yoke on front propeller shaft. Fig.22 Screw inNEWend yokemounting nut on front propeller shaft. Mount holder Pt. no. 2698 5890 3505 or Pt. no. 2698 5890 4102 on end yoke. Clamp holder in vice and tighten coupling flange nut. Assemble centre bearing bracket and clamping strap on rubber housing. Clamp strap on to the bracket at both ends. Ensure that there are no cracks at crimping. ASSEMBLY OF UNIVERSAL JOINT Position the cross in the yoke. Fig.23 Fig. 21 Fig. 22 Fig. 23