SAFARI

29 REAR AXLE Fig. 53 Fig. 54 Fig. 55 Hold the clutch pack in position and insert the threaded adapter of Track lock tool into top side gear. Insert forcing screw of Track lock tool and tighten to hold both clutch packs in position. Fig. 53 Install case into the axle shaft by aligning the splines of the side gear with those of the shafts. Loosen forcing screw slightly and assemble both pinion mate gears. Fig. 54 Hold gears in position by hand and insert turning bar into case. Pull on bar to rotate case allowing gears to turn. Note: Ensure that the holes of the pinion mate gears are in alignment with holes of the case. Prelubricate spherical washers. Tighten screw of Track lock tool to collapse the Belleville’ plates, as- semble spherical washers into case. Fig. 55 Caution: Ensure the holes of the washers and gears are lined up exactly with those of the case.