SAFARI

20 REAR AXLE Fig.32 Fig. 33 Fig. 34 Carrier Centre Section Inspect plates and discs for wear and scoring. Fig.32 Note: If any one member of either stock shows evidence of excessive wear or scoring, the complete stock is to be replaced on BOTH sides. Inspect gear teeth of side gears and pinion mate gears for wear and possible cracks. Inspect external teeth of side gear for wear or crack. Note: If replacement of one gear is required, then BOTH side gears, pinion mate gears and washers are to be replaced. Inspect cross pin for excessive wear. Replace if necessary. Inspect for wear on clutch retainer clip. Note: Replace all four clips if wear is evident on any one of the retainer clips. Inspect differential case for scoring, wear or metal pick up. If it is evident on the machined surfaces, then replacement of the case is necessary. Pre lubricate the thrust face of the side gears and the plates and discs. Fig. 33 Note: Assembly of plates and discs is to be done in exactly the same position as they were removed. Fig. 34