SAFARI

16 FRONT AXLE - 4 X 4 Remove hub - lock assembly. Note : 1. The knob should be at lock position. Fig.10 Note : 2. Hub - lock assembly is a non - serviceable component. If it is established that problem is in hub - lock, it is to be replaced with a new one. Remove snap ring from axle shaft. Fig. 11 Remove washer and outer, inner brake assembly. (Hub - lock components) Remove axle shaft. Using a socket, spanner pt. no. 2704 5890 3318 remove the outer spindle lock nut, lock ring, and inner wheel bearing adjusting nut. Fig. 12 Note : The inner adjusting nut has a pin assembled, to which engages the lock ring. Be careful that the pin is not damaged. Replace nut, if necessary. Remove spindle assembly by pulling steering knuckle from the hub. Fig. 10 Fig. 11 Fig. 12 AUTO LOCK AUTO LOCK