SAFARI

20 TRANSFER CASE 45. SHAFT & PUMP ASSY 49. HOSE CLAMP 50. HOSE COUPLING 51. PUMP ASSEMBLY 54. FRONT PUMP COVER 55. OUTPUT SHAFT 56. STRAINER 57. REDUCTIONHUB 58. SHIFT FORK FACING 59. REDUCTION SHIFT FORK ASSY Drive Chain Fig. 10 Remove snap ring and spacer from the output shaft. Remove drive chain, driven sprocket and drive sprocket from the output shaft. Separate the chain and sprocket when removing the assembly. Gerotor Pump Assembly Fig. 11 Loosen the hose clamp and remove the hose coupling from the pump housing. Remove hose clamp hose coupling and strainer. Slide the Gerotor pump off the output shaft and remove the output shaft. Separate the pump and output shaft. Reduction Shift Parts Fig. 12 Remove the reduction hub and reduction fork assembly from the case. Remove the two shift fork facings form the shift fork assembly. Front Output Assembly Fig. 13 Holding the end yoke with yoke holder, remove the nut and washer and then remove the end yoke and seal. Separate the end yoke and deflector and remove the output shaft. 40. SNAP RING 41. SPACER 42. DRIVE SPROCKET 43. DRIVEN SPROCKET 44. DRIVE CHAIN 55. OUTPUT SHAFT (REAR) 71. OUTPUT SHAFT (FRONT) Fig. 10 Fig. 11 Fig. 12 Fig. 13 65. NUT 66. WASHER 67. SEAL 68. YOKE ASSY 69. DEFLECTOR 70. YOKE 71. OUTPUT SHAFT (FRONT) 111. TRANSFER CASE