SAFARI

46 GEAR BOX G-76 SUB ASSEMBLY OF GEAR BOX HOUSING COVER FRONT Press dowel pins (12) to bearing tube, if removed earlier. Fit bearing tube to the cover. Push in oil seal (3) with help of drift Pt.No. 2654 5890 26 07 and handle Pt.No. 2640 5890 35 11. Fig. 85 SUB ASSEMBLY OF GEAR CASE COVER REAR Refer fig. 86&87 Fit oil seal (43) with the help of drift, Pt.No. 2654 5890 26 07 and handle 2640 5890 35 11. Fill 3% grease Mo S2 320 in the pocket between main lip and dust lip of oil seal. Keep speedo drive gear (48) inside the cavity then push in speedo shaft (49) such that cable end goes towards tapped hole side. Fit oil seal - speedo shaft (51) in the threaded plug - speedo shaft (50) keeping lip side outwards. Tighten plug in the housing. Press plug - speedo drive (47) in housing from other side. Ensure gap of 1 mm between plug face to speedo shaft end. Fig. 87 Fig. 85 47 48 49 50 51 Fig. 86