SAFARI

33 GEAR BOX G-76 IDENTIFICATION PARAMETERS ENGAGING GEARS Refer fig. 49 There is a common engaging gear for 1st/2nd (32) and Reverse/5th (32a) application. However, it has unsymmetrical shank. Engaging gear for 3rd/4th (22) has symmetrical shank. SYNCHRO CONES Refer fig. 50 There are three types of synchro cones. 1st/Reverse synchro cone (34)/(34a) is bigger in diameter and having slender dog teeth. 2nd/5th synchro cone (30)/(30a) is also bigger in diameter but having thicker dog teeth. 3rd/4th (17)/(17a) synchrocone is smaller in diameter and having depressions on minor diameter side face. SHIFTER SLEEVES Refer fig. 51 There are three types of shifter sleeves. 3rd/4th shifter sleeve (18) is without any groove on its outer diameter. 1st/2nd shifter sleeve (33) is with one groove on its outer diameter. Reverse/5th shifter sleeve (38) is having two grooves on its outer diameter. Fig. 50 Fig. 49 Slender dog teeth. Fig. 51 2 nd / 5 th 3 rd / 4 th 1 st / Rev Rev / 5 th 1 st / 2 nd 3 rd / 4 th