SAFARI

22 BODY 17. REMOVAL/INSTALLATION OF FRONT SEAT (with and without height adjuster Fig. 23) REMOVAL l Remove the electrical components mounted on the seat frame. l Remove the front seat mounting screws on the floor and remove the seat. l Disassemble fuel lid release lever (where fitted) INSTALLATION l Locate the front seat on the fitment holes. l Check that the carpet is aligned properly. l Fit the seat using 6 hex. screws (M8x25), spr. washers (B8), bright washers (8.4) and tighten the screws. l Check for fuel lid operating cable (if fitted) Note : For vehicles fitted with airbags the front seats mounting arrangement is as shown in fig. 23a Fig. 23. 1. MOUNTING SCREWS FRONT 2. MOUNTING SCREWS REAR 1 2 Fig. 23a Vehicle Front