SAFARI

20 BODY 1. Front Bumper 2. Sump Guard 3. Front Bumper Grill 4. Assy. Bkt. side for bumper mtg LH/RH 5. Assy. Bkt. for bumper mtg LH/RH 1 8 9 7 10 6 5 4 e f a b 6. Adjusting screws 7. Front Grill 8. Bush Grill mtg. 9. T Emblem 10. Mud Cover c d 15. REMOVAL / INSTALLATION OF FRONT BUMPER (Fig. 21) REMOVAL l Remove the mud cover over side bracket. l Remove the electrical connections for fog lamps. l Remove the bumper grill by unscrewing screws No. (a) to (d) Then unscrew the to bumper mounting bolts (e) & (f ) after properlly supporting the bumper and then remove the crash guard. l Pull out the bumper. INSTALLATION l Support the bumper and connect the electric connections for fog lamps. l Align both ends of front bumper with two welded pins on either side at fender and top flange (middle portion in to the slot of front grill). l Loosely mount the front bumper on side mounting screws. Fix 2 hex. fl bolts (M10x25) and washer (A10.5) at the both sides of front number plate (at location e, f ). l Adjust side gap by tightening/loosening the adjusting screws. l Adjust the vertical gap by moving the bumper manually. l Tighten all fasteners once the bumper gap is set and close the covers at front side. Assemble the bumper grill on the bumper by four screws No. (a), (b), (c) & (d). l Fit the mud cover over the side bracket with the help of a hex. fl. bolt (M8x20) and a button.