SAFARI

ELECTRICALS 94 2. To turn MR-201 in 90 Deg. Clockwise. Please do not turn only Mirror, but with Stem. To push Stem of the mirror into Stem Mount firmly upwards (Fig.13) & to turn the mirror to 90 Deg. Anti- clockwise, until it locks in position into stemmount (mirror button) on the windshield (Fig.12) to normal viewing position (Fig.15) 3. Connect the 4- pin mini DIN of Mirror cum Monitor to Mirror side wiring 4- pin mini DIN, properly matching white arrows on both connectors. Cover the joint by good insulation tape, to avoid water entry. (Fig.14) 4. Connect the 2- pin Connector of Mirror cum Monitor to 2-pin connector of power supply interlocked with Reverse Gear Switch. 5. The Assembly should look like the photo below (Fig.15) For dismantling or replacement please follow the reverse steps. Precaution: If there is no image on LCD Monitor or image is blurred or it is blank, while reversing, it should be checked for all components are functional & all connections are intact. Also to check for 12 V DC Power reaching Camera & Mirror. Fig.12 Fig.13 Fig.14 Fig.15