SAFARI

ELECTRICALS 18 Fig. 18 Fig. 17 Fig. 19 V H Head Lamp Bulb Replacement Fig. 17 & 18 Raise the bonnet of the vehicle. Unscrew & pull out the rear protective cover. Pull out the cable socket from the bulb. Remove locking lever holding the bulb and remove the bulb. Install new bulb, properly locating it in the housing. Fit back the locking lever cable socket and cap. Realign Head Lamp after Replacing Bulb Do not clean or touch the reflector as it will damage the mirror finish of the surface. Your vehiclehashalogenhead lampbulbandpencil beam bulb one each on each side. When replacing, handle it by steel base. Protect the glass from contact with your skin or hard object. If you touch glass, clean it with denatured alcohol and clean cloth. Note : Halogen head lamp bulbs get very hot when lit. Oil, preparation or a scratch on the glass can cause the bulb to overheat and shatter. Side Repeater Lamps : Removal : Use a small screw driver to push in and release the catch and take out the lamp. Fig. 19 Pull out the 2 pole connector and take out the lamp Fitment : Connect the two pole connector and insert the lamp into the cutout and press till the catches hold.