SAFARI

20 4 PL FUEL SYSTEM Inspection : 1. With ignitionswitchOFF,disconnect connectors from canister purge valve. 2. Check resistance between two terminals of canister purge valve. Resistance 26 + 4 ohm at 20 0 C. If resistance is as specified, proceed tonext operation, check. If not, replace. 3. Blow air into hose removed from T connector. Refer Fig 26. 4. Verify that no air flows through the valve when the engine is stopped with purge valve connectors disconnected. 5. Air will pass through freely when the 12V battery voltage is applied to valve connector. It indicates that the valve is functioning properly. If no air flows, replace the valve. 6. Reinstall valve connector. 7. Reconnect vacuumhoses. Warning : Do not suck air through purge valve. Fuel vapours inside valve is harmful. Fig. 27 Fig. 26