SAFARI

1 ABS - ECU DIAGNOSTIC The system software is a user friendly. The user can load it on laptop/Desktop. The vehicle interface unit is light weight and compact in size to facilitate easy portability. This works on ve- hicle battery supply. This tester will execute all the commands supported by ECU , which help in diagnostic of the ABS system. This diagnostic unit is capable of performing the following functions : 1) Read Complete ECU Status l No of DTC’s l Valve Relay l Wheel Speed l Motor Status l Valve Status l Brake Light Switch l Warning Lamp Status l Battery Voltage 2) Read DTCs i.e. Read Diagnostic Failure Codes 3) Clear DTCs 4) Actuate Components Like (Motor , Inlet Valves front & Rear ,Outlet Valves front & Rear) 5) Warning Lamp Test 6) Brake Bleeding 2. Detailed Description : Required power supply : The Vehicle Interface Unit does not require any exter- nal power supply . It works on vehicle battery , pro- vided through the OBD cable . Connect the RS232 cable to the Laptop/Desktop COM port The OBD cable is connected to the Diagnostic con- nector of the wiring harness. 3. Specification 3.1. Laptop / PC Operating system : WIN 98/ WIN 2000 /WIN XP or later version CPU Speed : 933 Mhz or greater RAM : 128 MB Video Display : 800 x 600 resolution with 24 bit colour RS232 port : Minimum 1No. CD ROM Drive Printer Port (optional) The software works with the above features of a Desk- top/ Laptop . Any other combination of speed and RAM less then specified will slow down the response of the software. 3.2. Vehicle Interface Unit Interface unit from M/s Silicon Engines , USA OBD cable RS232 cable