SAFARI

95 4 DLT ENGINE Fig. 183 FUEL HOSES AND FUEL LINES (Fig. 183) Removal 1. To avoid damage to the fuel lines / hoses while disconnecting slide back the clamps then twist the lines as you pull. Caution : a. When the fuel pipe and hoses are removed, use waste cloth etc. to prevent spilling fuel. b. Spilt fuel should always be wiped away. c. After the fuel pipe & hose have been removed, install blind caps to prevent entry of foreign particles. Inspection 1. Visually check all hoses and pipes connected via clamp for leaks, loose connect ions, deterioration or damage, hose crack etc. Replace if necessary. 2. Make sure that all clamps are secure. 3. If the pipe clamps are found deformed, bend or broken replace with new one. Assembly 1. Do not tighten the clamps excessively to avoid damage to hoses. Use recommended tools for fitment of clamps. 2. Necessary care to be taken to connect hose to pipe and clamp on hose. 3. Do not kink, twist hoses when they are routed. 4. When attaching the fuel hose to the pipe, be sure that the hose is attached as shown in the Fig. 184 5. After all of the fuel pipes and hoses have been connected, start the engine and then confirm that there is no fuel leakage from any of the connections. Fig. 184