SAFARI

ENGINE 105 Engine No. ............................................................ Chassis No. ........................................................... Kilometres ............................................................. Kilometres since last overhaul .................................. Reason for dismantling................................................ .................................................................................... .................................................................................... .................................................................................... COMPRESSION READINGS FRONT Cylinder 1 2 3 4 Pressure Dry kg/cm 2 Wet CYLINDER BORE Dial Gauge Set At................mm Piston Size (Stamped............mm) Positive A B Ovality A B Ovality A B Ovality A B Ovality A B Ovality aa bb cc dd ee ff Taper Max Taper mm Max Ovality mm PISTON RINGS *Piston Ring Butt Clearance (mm) † Piston Ring Lateral Clearance (mm) PISTON NO. PISTON NO. 1 2 3 4 1 2 3 4 Piston Ring No. 1 2 3 4 †Piston ring and grooves should be properly cleaned of carbon and other deposits. *Check butt Clearance at unworn position of cly. bore CONCLUSIONS/RECOMMENDATIONS : PISTON RING GROOVES N.B. – Check Lateral Clearance of new piston rings in grooves Piston Ring No. PISTON RING 1 2 3 4 1 2 3 A = Non Thrust side B = Thrust side Checked by............................. Date ........................................ ENGINE INSPECTION SHEET I CYLINDER BLOCK & PISTON Cly. No. 1 2 3 4