SAFARI

ENGINE 48 Fig. 9 Fig. 10 Fig. 11 Fig. 12 REPLACEMENT OF OIL SEAL IN TIMING HOUSING COVER 1 Drain cooling water in clean container if mixed with anti-freeze so that it can be reused. 2 Remove radiator assy and intercooler. 3 Slacken and remove poly ‘V’belt Fig. 9. 4 Unlock and unscrew bolts with water pump pulley Fig 10. 5 Lock the crankshaft at flywheel and remove crankshaft pulley mounting bolt Fig. 11. 6 Pull out pulley using suitable two leg Puller with Spacer. 7 Remove electrical connection for cam sensor. 8 Remove screws holding noise dampening cover and tap it out from dowel pins. 9 Take out the oil slinger. Fig. 12. 10 Remove oil seal from timing gear housing cover with a suitable punch. 11 Remove the gasket and clean timing housing cover.