SAFARI

42 GEAR BOX G-76 The control dimension to be maintained between 198 ± 0.1mm Counter Shaft 3rd gear rear face and housing face-Rear half. 1.0 Dimensions to be measured Symbol Example 1.1 Measure the dimension between Counter A 200.00 Shaft 3rd gear rear face and taper roller bearing outer race face. Fig. 90 and 92 1.2 Measure the rear cover depth. Fig. 90 and 92 B 2.30 1.3 DifferenceA-B C 197.70 1.4 Shims required : 198 – C D 0.30 19. MEASUREMENT OF CONTROL DIMENSIONS (FOR SELECTIONOF SHIMS) OVER THECOUNTERSHAFT OVER THE MAIN SHAFT The control dimension to be maintained between 197±0.1mm Main Shaft 2nd gear shoulder face front and housing face - Rear half 2.0 Dimensions to be measured Symbol Example 2.1 Measure the dimension between Main Shaft E 202.00 2nd gear shoulder face front and taper roller bearing outer race face Fig. 91 and 93 2.2 Measure the rear cover depth Fig. 91 and 92 F 5.50 2.3 Difference E – F G 196.50 2.4 Shims required 197 – G H 0.50