SAFARI

61 4 DLT ENGINE VALVE CLEARANCE VALVE CLEARANCES SHOULD BE CHECKED ONLY WHEN ENGINE IS COLD. T urn cam shaft with spanner, 2654 5890 05 01 and check valve clearances. Refer Fig. 111. Adjust as given below: N ote respective valve clearances. C alculate correct sizes of shims (The shims are available in thickness 2.400 to 3.560 mm in steps of 0.050 mm) to get specified valve clearances as shown in following table. CALCULATION INLET EXHAUST Specified 0.150 +0.04 0.300 +0.04 Measured 0.250 0.200 Difference + 0.100 - 0.100 Existing shim thickness 2.800 3.050 Shim thickness required 2.900 2.950 S mear moly paste on both sides of shims. I nstall all eight correctly determined size shims in their respective positions. R echeck valve clearance and if incorrect repeat above procedure. R emove camshaft gear. Fitment I nstall cam shaft front and rear oil seals using adapter, 2654 5890 05 08. Refer Figure 112. Fig. 111 Fig. 112