NEXON EV SERVICE MANUAL

BODY 46 4.34. PLENUM COVER: REMOVAL 1. Open the Bonnet. 2. Disconnect the negative terminal of battery. 3. Remove both front wiper arm and blade assembly. (R efer wiper arm and blade assembly removal process ). 4. Disconnect washer tube. 5. Pay out seven Grommet pin and pull out plenum cover. FITMENT For fitment follow reverse procedure of removal. 4.35. BONNET INSULATION REMOVAL 1. Open the bonnet. 2. Pull out the insulation from the bonnet assembly. FITMENT For fitment follow reverse procedure of removal. NOTE While pulling out the Bonnet insulation, care should be taken such that clips do not get damage if found damaged replace the same with the new one