NEXON EV SERVICE MANUAL

HV ELECTRICAL SYSTEM 42 E. E-DRIVE REMOVAL 1. Refer Instructions for working on HV Components mention before starting work. 2. Loosen and Remove the mounting screws & nut of splashguard. 3. Loosen and Remove the mounting screws & nut of splashguard. 4. Loosen and remove the mounting nut of tyre & take out (LH / RH side ) 5. Loosen and remove the boll joint bolt of lower arm to axle both LH & RH side. 6. Apply brake and remove drive shaft lock nut on both LH and RH side. 7. Drain the coolant and Remove the pump (Refer coolant pump section for removal process).