NEXON EV SERVICE MANUAL

BODY 14 20. Remove mounting bolts of dashboard (17 bolts (M6 x 16) + 1 nut) 21. Disengage 3 locators located on BIW plenum panel brackets. 22.Remove the dashboard, while removing Dashboard carefully disengage HVAC system behind the glove box. FITMENT For fitment follow reverse procedure of the removal. • COCKPIT REMOVAL (COMPLETE ASSY) REMOVAL 1. Remove Door (For procedure refer Door removal process in Door section.) 2. Remove two dashboard mounting bolts on LH & RH side as shown in figure. 3. Remove steering wheel with Driver air bag (if applicable) (For procedure refer steering wheel removal process in steering section.) 4. Remove End Cap RH and pull out Driver lower panel. Detached Nacelle Upper assembly from Nacelle Lower & Cluster Cover (Gap Hider which is a part of Nacelle Upper is attached to Cluster Cover by rib locks) 5. Remove Nacelle Lower (by removing three screws with steering column) 6. Remove nacelle Assembly. (For removal refer steering column removal process in steering section.)