NEXON EV SERVICE MANUAL

BODY 9 4. Disconnect one electrical connections behind the floor console assembly. First pull out the knob(Snap fitted) and unclip the wiring 5. First unscrew the scrivet then pull out the side panel. 6. Remove two mounting bolt (LH & RH). To get access to remove bolts which are mounted on lower bracket • First remove rear finisher • Remove rear lower cover • Remove the bolts on lower bracket 7. Remove LH ,RH side mounting screw of console panel 8. Disconnect two connections behind the control panel assembly. 9. Disconnect USB auxin connectivity module Assembly. (For removal refer USB auxin connectivity module removal process in Electrical section.)