NEXON EV SERVICE MANUAL

FATC 22 C. LINEAR PRESSURE SENSOR (LPS) Location: Linear Pressure Sensor is located on high pressure liquid tube, beside the brake booster. Trinary pressure switch is provided on the high pres- sure tube liquid line of the refrigerant and it is functionally connected to Vehicle Electronic control Unit (VCU) to control the AC compressor and radia- tor/ condenser fan. It also gives a feedback to the Control panel in case of its intervention. PIN OUT: REMOVAL 1. Discharge the refrigerant using standard recover- ing equipment. 2. Disconnect electrical connector on LPS. 3. Remove pressure sensor from AC pipe FITMENT Follow the reverse procedure of removal.