NEXON EV SERVICE MANUAL

BRAKES 54 10.Remove the Primary cable of the Parking Brake Lever from equalizer located underbody. 11.Now disconnect all the parking brake cable clamps from the body mountings. INSTALLATION OF CABLE Carry out the above steps in appropriate sequence for its fitment. NOTE: 1. Fit the cable to the brake shoe lever. 2. Fit the parking brake cable clip to the brake back plate securely . INSTALLATION OF PARKING BRAKE LEVER 1. Proceed in the reverse order of removal. 2. Tighten the mounting bolts of the parking brake lever to the torque specified. 3. Adjust the parking brake cable slackness as per the procedure given. 4. Reconnect the electrical connections to the parking brake switch assembly and confirm that the parking brake lamp becomes “ON” when parking brake lever is at first notch. 14.8. PARKING BRAKE CABLE ADJUSTMENT 1. Keep Parking brake lever in 0 th notch and tighten the parking brake cable adjustment nut through parking adjustment cover of center console. 2. Pull Parking brake lever fully and release it for 5 times. 3. If notch position is 3 to 4 then hand brake setting is OK. 4. If notch position is above 4 then tighten the hand brake adjustment nut for getting final notch position. 5. If notch position is below 3 then loosen the nut for getting final notch position.